Stearn Guitars & Such

Stearn Guitars creates custom handmade guitars.  We specialize in crafting quality baitone, parlor, and acoustic guitars in the heart of the Russian River.

Filtering by Tag: stearn guitars

Tradition? Part 2...

(This is the second part of a three part article. Scroll down to find part 1)

I came away from the Totnes school feeling a bit smug about my newly acquired skills, (now I cringe at the memory of my smugness), and I opened up my business making guitars the way I learned in England. My dad would come and hang out at my shop to check out what I was up to, and, looking back, I could tell he was patiently putting up with my "preciousness". He came from the tradition of making jigs and fixtures in order to do complex woodwork using power tools. Every so often, while watching me do something such as leveling a back plate with a jointer plane, he would politely ask why I couldn't figure out a way to do this more quickly. I remember feeling a little affronted at such a suggestion (gag me with a spoon) and I would tell him there were good reasons for doing it the way I was doing it.

Thicknessing a Waterfall Bubinga back plate

Thicknessing a Waterfall Bubinga back plate

Well, it didn't take too long before I found myself wondering the same thing. It was taking me a long time to complete a guitar and I realized that I was still very much a beginner with the traditional use of hand tools. I began to search the internet for how other guitar makers executed certain tasks; arching the braces, in particular, continued to be a source of frustration to me. Arching a brace is the process of putting a radius on the side of the brace that is glued to the top or back plate. Most "flat-top" guitars have a slight radius to the top and a more pronounced radius to the back, which, among other things, adds strength. At the Totnes school, I learned how to arch a brace using a mathematic calculation and a hand plane. It worked, but every brace was unique, so the process of shaping all the braces in a guitar was very time consuming. I scoured the internet for ideas and soon I came upon a way to make braces in a fraction of the time it was taking me. In a small way, it was kind of like losing my faith. Instead of losing my faith in a religion, it was the tradition that I had learned that I was disavowing. There are some remarkable similarities here, but that's a whole different ball of wax.

Arching a Spanish Cedar back brace with a Jack Plane

Two back braces arched

At the time, I was offering two models of guitars. So, I realized that if I could make master set of braces for each model, and then duplicate the master set, I would be saving literally days and days of labor. I ended up making a simple pattern jig that held an unshaped brace over a brace-specific radius, and then used a pattern router bit to shave the brace to the correct radius. As with any jig, there were kinks that had to be worked out or around, but I eventually nailed it down and ended up making enough braces for around ten guitars in a couple of days. That was the turning point for me. After that, my mind began to fixate on ways to speed up the process of making a guitar without sacrificing quality. Coming up next, Charles Fox and The American School of Lutherie...

Tradition? Part One...

I began my guitar making career by purchasing a Martin kit guitar from Stewart Macdonald. I never even pulled it out of the box because,  in the process of researching guitar-building on the web, I learned that there were many guitar-making schools out in the world, each offering various approaches to the craft. I was in my 3rd and final year of teaching high school English and found myself at a crossroads. I wanted to work with my hands; teaching, however enjoyable and rewarding, wasn't giving me that opportunity. So, after researching a few different schools, I decided to pack up and move to England for a few months with my wife and 12 month old daughter to attend the Totnes School of Guitarmaking.

I grew up in my dad's custom furniture shop and worked with him for a while in my early years and even had my own custom woodworking business for a little while, so I thought I knew my way around a shop. Well, I did, but it was a modern American shop that I was familiar with;  jigs, fixtures, power tools, etc., etc... Within a week at the Totnes School of Guitarmaking, I realized that I really didn't know very much about working with wood. 

Hand planes of all shapes, sizes and purposes, hand drills, scrapers, chisels, jewelers saws, coping saws, files, rasps, squares, levels, compasses, gauges, rules, straight-edges, micrometers, back-saws, rip-saws, miter-saws, mallets, plumb-bobs, hand vices, bench vices, spokeshaves, witches-tooth(s), knives, (and many more I can neither recall or am unaware of), are all tools that have been perfected over centuries, even millennia, by thoughtful and creative artisans and craftsmen looking for ways to more precisely and cleanly execute the job at hand. Growing up in a modern American shop, I wasn't even aware of most of these tools. I had little idea of how to properly use any of them and absolutely no idea of how to maintain or sharpen them. My education at the Totnes School of Guitar Making was essentially learning how to use and maintain these tools. What is still incredibly fascinating to me is the fact that, by learning how to use these tools, I was learning how to make anything, not just guitars. With hand tools, one can create complex and intricate shapes and designs, whereas with power tools, one is limited to what the tool itself can do. Even with a shop equipped with wide belt sanders, table saws, drill presses, routers with all there various bits, band saws, scroll saws, complex jigs and fixtures, etc., the object being produced is limited to the one or two dimensions that the machine can deal with. Hence, the intricacy of the creation is limited to the ability of the machine, even when the machine is utilized to its fullest potential. (It must be added here that the CNC machine (Computer Numerical Control)  has changed that to a great degree, but that is another story altogether.) 

The only power tools I ended up using at the Totnes school, (and these were optional), were a router to rout out the truss-rod channel and the binding channels, and a "pillar-drill" (drill press) to drill the holes for the tuners in the headstock. Absolutely everything else was created using hand tools. Phil Messer, the owner and instructor at the Totnes School of Guitar Making is a master luthier, in the true sense of the word, and has laser-like precision with his use of hand tools. I don't think there is any stringed instrument that he could not make, and I believe that he could create a tighter joint between two top or back plates with a jack plane than any jointer or laser-guidered router on the market. I'm not sure how long Phil has been learning his craft, but I think it's safe to assume that he's been at it for quite some time. In the States, such a career, education, and apprenticeship, is a rare thing. 

All of this brings me to the main point of this post, which is really just taking a look at tradition and its importance, and how much we should or shouldn't adhere to it. I'll continue this on my next post. Thanks for reading and feel free to comment.